Switching on, Let’s get started, Getting started 04 – Pioneer DV-656A User Manual

Page 23

Advertising
background image

Getting Started

04

23

En

Let’s Get Started

When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can set
up the player to work with the kind of TV you
have, then either use the Setup Navigator to
make more settings, or jump right in and
start playing some discs.

Before continuing, make sure that you’ve
loaded the batteries in the remote control.

• For customers in Taiwan: The default on-

screen menu language is Traditional
Chinese. Use the instructions below to
complete the Let’s Get Started setup,
then see

page 72 for instructions on

changing the on-screen display lan-
guage to English.

GUIDE

RETURN

ENTER

Switching on

After making sure that everything is con-
nected properly and that the player is
plugged in, press

STANDBY/ON on the

front panel, or on the remote control to
switch the player on.

Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.

STANDBY/ON

OPEN/CLOSE

0

41

¡

PROGRESSIVE

VIDEO OFF

Î

STANDBY/ON

• My DVD player switches on but there is

nothing displayed on my TV.

Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
player to the

VIDEO 1 inputs on your TV,

switch your TV to

VIDEO 1.

• If you connected this player to an AV

receiver, make sure that the receiver is
switched on and set to the correct input.

• You can also use the

0 OPEN/CLOSE

button to switch on the player and open
the disc tray at the same time.

• This player features a screen saver.

If the player is stopped or paused and
no button is pressed for five minutes,
the screen saver starts.

Advertising
This manual is related to the following products: