Pioneer DV-656A - Manual (Page 51)

The Initial Settings Menu 08
51
En
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
On
Off
Initial Settings
If at any time you need to switch off the
digital audio output, set this to
Off, other-
wise leave it On.
• You can’t switch on/off the optical and
coaxial outputs individually.
• There is no digital output when playing
SACDs and some DVD-Audio discs
regardless of this setting.
Dolby Digital Out
• Default setting: Dolby Digital
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
Digital Out
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Dolby Digital
Dolby Digital > PCM
Initial Settings
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to
Dolby Digital, otherwise set to Dolby
Digital > PCM.
Using the Initial Settings
menu
The Initial Settings menu is where you can
set preferences for language, audio and
video output, and so on.
If a menu option is grayed out it means that
it cannot be changed at the current time.
This is usually because a disc is playing.
Stop the disc, then change the setting.
1 Press SETUP and select ‘Initial Set-
tings’ from the on-screen display.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Video Adjust
Initial Settings
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or
region.
Digital Audio Out settings
Digital Out
• Default setting: On
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.