Panasonic RX-D29 - Manual (Page 10)

10
RQTT0585
Using the timers
(Remote control only)
5
1-3 4
2 · 3
Using the play timer
The play timer can be set to a certain time to wake you up.
Preparations:
• Turn the unit on and set the clock. (Perform the “Setting the time” steps
on page 9.)
• Prepare the music source you want to listen to and set the volume.
1 Press [CLOCK/TIMER ADJ] to select “ PLAY ON”.
Clock PLAY ON
Previous display
PLAY OFF
PLAY ON: to set the start time
PLAY OFF: to set the finish time
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2 During “ PLAY ON” display
within approx. 10 seconds
Press [– / ] or [ / +] to
select the start time.
Press [CLOCK/TIMER ADJ].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3 During “ PLAY OFF” display
Press [– / ] or [ / +] to
select the finish time.
Press [CLOCK/TIMER ADJ].
Setting the start and finish times
Turning the timer on
4 Press [TIMER SET/CHECK] to
display “ PLAY”.
The settings are shown in the following order:
start time
→ finish time
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5 Press [TAPE/OFF] and stop the tape to turn the unit off.
The unit must be off for the timer to operate.
If the unit is on, the timer will not function.
Play will start in the set condition at the set time.
To cancel the timer (when the unit is on)
Press [TIMER SET/CHECK] to clear the timer indicator from the display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when the unit is on)
To change the play times
Perform steps 1, 2, 3 and 5.
To change the source or volume
1. Press [TIMER SET/CHECK] to clear the timer indicator from the display.
If the settings are shown, press one more time.
2. Make changes to the source or volume.
3. Perform steps 4 and 5.
To check the settings (when the unit is off)
Press [TIMER SET/CHECK].
The settings are shown in the following order:
start time
→ finish time → source → volume → current time
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer's start time.
Note
If you turn the unit off and on again while a timer is functioning, the finish
time setting will not be activated.
Using the sleep timer
Set the unit to stop and turn off after a certain time.
While enjoying the desired source
Press [SLEEP] to select the desired time (in minutes).
30 60 90 120 OFF (off)
To confirm the remaining time (when the unit is on)
Press [SLEEP].
To change the setting
Press [SLEEP] to select the new setting.
Note
• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
Press [SOUND VIRTUALIZER]
to display “
”.
Press again to cancel.
Note
• Recordings are unaffected by this
feature.
• The actual effect depends on the
source played.
Press [SOUND EQ] to select a setting.
XBS CLEAR SOFT VOCAL
EQ OFF (cancelled)
3D sound with the Sound Virtualizer
Remote control only
You can create a three-dimensional sound field when listening to stereo sound.
Sound quality
You can choose one of four types of sound quality.
XBS:
Adds punch to rock
CLEAR: Clarifies higher sounds
SOFT:
For background music
VOCAL: Adds gloss to vocals