Mcu card management, Listing the installed cards, Mcu card management -9 – Polycom DOC2232A User Manual
Page 103: Listing the installed cards -9
Chapter 8 - MGC-25 Management Tools
8-9
MCU Card Management
The following task may be performed to manage the MCU cards:
•
Listing the installed modules
•
Viewing the module parameters
•
Listing the cards units and options
•
Displaying the Faults Report
•
Resetting MCU
Listing the Installed Cards
The MGC-25 can contain several cards. The cards are identified
automatically by the MCU. You can check which are installed in a particular
MCU by listing them.
In the Browser pane, expand the MCU tree.
2.
Expand the MCU Configuration tree.
3.
Expand the Cards list.
All the MCU slots are listed. Empty slots are indicated by a white card
icon. Occupied slots are indicated by a green card icon.
The MCU must be connected in order to perform the above tasks. For details,
see Chapter 3, “Connecting to an MCU” on page 3-8.
The slot numbers indicated in the Cards tree are virtual slot numbers used for
representing “cards” per functional area, not physical slot numbers. To view the
physical slot number of a card, view the Card Properties - Common Parameters.