Placing the mgc-25 on a desktop, Connecting cables, Placing the mgc-25 on a desktop -9 – Polycom DOC2232A User Manual
Page 23: Connecting cables -9
Advertising
Chapter 2 - Hardware Description and Installation
2-9
Placing the MGC-25 on a Desktop
Place the system on a secure, flat and clean surface and avoid placing
anything on top of the system.
Connecting Cables
Connect the following cables:
•
Power cable - insert the connector firmly into the socket so that almost
all of the narrow section of the connector is inserted
•
ISDN PRI or T1-CAS cables (optional)
•
LAN network cable (optional)
•
Control LAN cable (to the LAN network with MGC Manager PC)
Advertising
This manual is related to the following products: