Access point configuration – Polycom INTERMEC WA21 User Manual
Page 6
Field Verified
Configuration Guide
PN: 1725-36053-001_G.doc
6
Access Point Configuration
The following AP configuration steps need to be repeated for each AP
radio that you are planning to use with VoIP.
1. Connect to the AP using the Web browser interface. Consult the
access point documentation for details.
2. Go to
IEEE 802.11B Radio
and set the
SSID (Network Name)
on the AP
the same as the setting for the SpectraLink 8000 Wireless
Telephones.
3. Go to
IEEE 802.11B Radio: Advanced Configuration
and set
Data/Voice
Settings
option to
Data and SpectraLink Traffic
.
4. Go to
IEEE 802.11B Radio: Advanced Configuration
and set the
Basic
Rate
to
11Mb/s.
5. Go to
Spanning Tree Settings: Global Flooding
, set
Multicast Flooding
to
Universal (Inbound)
6. Save changes and reboot.
The AP is now ready for use with SpectraLink 8000 Wireless
Telephones.