Pioneer AVH P4300DVD - Manual (Page 66)

Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
! Operation returns to normal when the phone
connection is ended.
Selecting the menu language
The menu language can be selected from four
languages.
If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language, they can also be displayed
on this unit.
! The language can be changed for the fol-
lowing:
— System menu
— Video Setup
— On-screen display
— Multi language setting for DivX
— Language for cautions
Some operations on this unit are prohib-
ited from use while driving or require
careful attention when operated. In
such cases, a caution will appear on the
display. You can change the language
for caution messages with this setting.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
! Some characters may not be displayed
properly.
1 Display the system menu.
Refer to Introduction of menu operations on
page 57.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
English (English)
—Français (French)—
Español (Spanish)
—Português (Portuguese)
Clearing Bluetooth memory
(AVH-P3300BT only)
Important
Never turn the unit off while the Bluetooth mem-
ory is being cleared.
1 Turn the unit off.
Refer to Basic operations on page 13.
2 Display the system menu.
Refer to Introduction of menu operations on
page 57.
3 Touch Bluetooth Memory Clear on the
system menu.
4 Touch Clear.
After selecting a desired item, a confirmation
display appears. Touch
OK to delete the mem-
ory.
# If you do not want to clear the memory, touch
Cancel.
Updating Bluetooth connection
software
(AVH-P3300BT only)
This function is used to update this unit with
the latest software. For information on the soft-
ware and updating, refer to our website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1 Turn the unit off.
Refer to Basic operations on page 13.
2 Display the system menu.
Refer to Introduction of menu operations on
page 57.
3 Touch Bluetooth Software Update.
4 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the software.
En
66
Section
15 Menu operations