Parker Products ViX250AE - Manual (Page 107)

100 VIX AE SERVO DRIVE USER GUIDE
SV
Save configuration
Syntax Units Range of ‘n’ Default See also
aSV - - - Z
Description When the SV command is issued, the current drive system variables and
configuration are stored in non volatile memory. Following a reset or power-
cycle the settings held in the non-volatile memory will be restored into the
drive.
Wait 1-2 seconds before sending any other command following an SV.
Properties Immediate
Example 1RFS ;return drive to factory settings
1MP ;set drive to position mode (step/direction control)
1SV ;save current settings
1Z ;reset drive
1M ;report current drive mode
*MP
Note This command will not operate whilst the motor is being commanded to
move.