Parker Products ViX250AE - Manual (Page 78)

5. EASI-V SOFTWARE 71
5. Easi-V Software
Computer Requirements
To be able to run Easi-V software, necessary for the control and programming of the ViX,
you will require an IBM™ compatible PC running Windows 95/98/2000/XP™, NT4 or ME.
The PC needs to be specified to run Windows™ with at least 16MB of RAM, a VGA monitor,
Windows™ compatible mouse, CDROM drive. The installed program size is approximately
1.3MB. Easi-V is supplied on a CD or may be downloaded free of charge from our Website
(www.parker-eme.com).
Serial Link Lead
You will need a 2-wire plus ground lead which has the Rx and Tx wires crossed over.
Wiring details are given in the Electrical Installation section.
Note: The information contained within this section applies to Easi-V software version 3.0 or
greater. If you have an earlier version of Easi-V software please request the latest version
from Parker using the contact numbers given at the beginning of this user guide or
download a copy from our web-site
(www.parker-eme.com).
Compatibility of EASIV
Always use the latest version of Easi-V, available from our web-site or supplied with the
product.