Pelco DX3100 User Manual

Pelco Car DVR

Advertising
background image

Product
DX3100

Issue

The Energy Policy Act of 2005 changes the effective dates of Daylight Saving Time (DST) in
the United States, Canada, and selected other locations. Beginning in March 2007, DST in
affected geographical regions will begin three weeks earlier (2:00 A.M. on the second Sunday
in March) and will end one week later (2:00 A.M. on the first Sunday in November) than in
previous years.

This change in the law invalidates the rule-based DST feature available in the DX3100. There
is no method to change the DST rules in the DX3100.

Note: Users in any region affected by the new DST schedule must perform the procedures in

this bulletin to ensure their DX3100 complies with the new schedule. Users in regions
not affected by the DST change should not perform these procedures.


Resolution

Users operating the DX3100 in regions affected by the new DST schedule must disable DST
functionality on their DX3100 and subsequently adjust the system time manually to comply
with the new DST schedule.



Instructions

Users should refer to the DX3100 manual to see instructions on setting the system time
manually.


Note: When system time is adjusted backward for the fall time change, the DX3100 will not
record for one hour, until the system time has advanced beyond the previously recorded time.
(Example: When user sets system time back from 2:00 A.M. to 1:00 A.M., the DX3100 will
not resume recording until system time is 2:00:01 A.M.). Contact Pelco product support at 1-
800-289-9100 for details.



The information on this page and the relevant software updates are based on the best available

information at the time of posting.

Advertising