First-time operation – Panasonic CF-73 User Manual

Page 12

Advertising
background image

12

Getting S

tarted

First-time Operation

Connect your computer to a power outlet.

CAUTION

Be sure the AC adaptor is connected until completing the first-time use operation.

When using the computer for the first time, do not connect any peripheral de-

vice except the battery pack and AC adaptor to the computer.

Handling the AC adaptor

Do not twist or pull the AC power cord forcefully. Doing so may damage the

connections.

Use only the specified AC adaptor with your computer. Using an AC adaptor

other than the one supplied might damage the battery and/or the computer.

When the DC plug is not connected to the computer, disconnect the AC cord

from your AC wall outlet.

Problems such as sudden voltage drops may arise during periods of thunder and

lightning. Since this could adversely affect your computer, an uninterruptible

power source (UPS) is highly recommended unless running from the battery

pack alone.

4

5

Open the display.

1

Pull the carrying handle forward.

2

Lift up the latch.

3

Lift open the display.

CAUTION

6

Turn your computer on.

Press the power switch and hold it for approximately one second until the power indi-

cator turns on before releasing it.

Do not press the power switch and hold it for more than four seconds; this will

cause the power to be turned off forcibly.

Do not press the power switch repeatedly.

Once the computer is powered off, you must wait at least ten seconds before

powering it on again.

7

Setup Windows.

Moving the cursor or clicking buttons can be performed with the touch pad
(

page 18).

The battery pack will be charged automatically.
Charging Time: Approx. 3 hours
(Varies depending on the usage conditions.)

3

2

1

Latch

Power
Switch

Power
Indicator

DC-IN Jack

DC IN 15.6 V

CAUTION

1

At [Welcome to the Windows XP Setup Wizard], select [Next].

2

After reading the agreement, select [I accept this agreement] or [I don’t accept this
agreement], then select [Next].

NOTE

DC Plug

Do not press any keys or touch the touch pad until [Windows XP Professional
Setup] is displayed.
Do not use the touchscreen during the Windows setup.

If [I don’t accept this agreement] is selected, the Windows setup will be aborted.

Advertising