Planet Technology GRT-101 - Manual (Page 17)

PLANET Technology Corp. GRT-101/401 User ’s Manual
- - 12
3.3.2 Routing Mode for PPPoA and PPPoE with IP Sharing
Web UI Configuration
For Route Mode with Point-to-Point Protocol
over ATM and Ethernet, follow the following
setting. First select ROUTE and then click
Next for setting others parameters.
Enter VPI: 0 and VCI: 33
Select: LLC
Select: PPP over ATM or PPPoE
Click Next for ISP, LAN and DHCP server
setting.
Enter user name provided by ISP:
user@net
Enter Password provided by ISP:user
Re-enter Password for confirmation: user
Enter LAN IP Address: 192.168.0.1
Enter Subnet Mask: 255.255.255.0
Select DHCP Service: Enable
Select Next for Dynamic Host Configuration
Protocol, DHCP, setting. For DHCP service
disable.