Customizing your machine, Setting the fax parameters, Programming your machine – Panasonic AS200 User Manual
Page 29
PROGRAMMING YOUR MACHINE
P
R
O
G
RAM
MING
Y
O
UR MACHI
NE
27
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be
temporarily changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
by the procedure described below.
Setting the Fax Parameters
(see Note 1) (see Note 2)
Make sure that the FAX lamp is ON. If not, press
to select the "FAX MODE".
1
2
3
Enter Fax Parameter number from the Parameter Table.
(See page 28 to 31)
Ex:
for STAMP
4
5
Enter the new setting value.
Ex:
for ON
6
To set another parameter, press
to return to step
3 or press
to return to standby.
NOTE
1. To scroll the Fax Parameters in Step 2 or 4, press
or
.
2. To print a Fax Parameter List, see page 141.
SET MODE (1-4)
ENTER NO. OR
∨ ∧
FAX PARAMETER(1-99)
NO.=
❚
0
0
4
FAX PARAMETER(1-99)
NO.=004
04 STAMP(HOME)
1:OFF
2
04 STAMP(HOME)
2:ON
CLEAR
STOP
05 MEMORY(HOME)
2:ON