Panasonic AS200 - Manual (Page 35)

BA
S
IC
OP
E
RATI
O
NS
33
Basic Operations
Loading Originals
How To Load Originals
Sending Non-Standard Size Originals
Flatbed Scanning
When a book or an original is placed on the Platen Glass, the message “ANOTHER ORIGINAL?” is shown
on the LCD display when is pressed and the scanning is completed.
• If you wish to store another page, press and place another original, then press .
• If is pressed, the machine starts to dial the telephone number.
(see Note 1)
1. On the ADF / Inverting ADF 2. On the Platen Glass
• Place the original(s) Face Up on the ADF until the
leading edge placed into the machine stops.
• Place a book or an original Face Down on the
Platen Glass, aligning it with the arrow mark on
the original size guides.
NOTE
1. When an oversized original is sent to another machine, sometimes, it is reduced in accordance with the other
party’s recording paper size.
EX:
Original Size
Guide
Face Up
Original Size
Guide
Face Down
P When transmitting non-standard size
document(s), the machine may perform
Rotate Transmission automatically and not
transmit the portion of the document that
exceeds the standard size ("P" portion).
(See Note 1)
Direction
Rotation XMT
The part which
protrudes from the
Fixed size is not sent.
START
YES START
NO
A3 size A4 size