Manual number dialling, Basic operations, Sending documents – Panasonic AS200 User Manual
Page 41
BASIC OPERATIONS
BA
S
IC
OP
E
RATI
O
NS
39
Manual Number Dialling
To dial the telephone number manually, follow the steps below.
(see Note 1) (see Note 2) (see Note 3)
Make sure that the FAX lamp is ON. If not, press
to select the "FAX MODE".
1
a
Place original(s) face up on the ADF.
or
1
b
Place a book or an original face down on the Platen
Glass.
2
Make sure that the MEMORY lamp is on.
If not, press
to set “On”.
3
Enter a telephone number from the keypad.
Ex:
• If your machine does have the 2nd G3 Fax
Communication Port Kit installed, the machine will
automatically select the available telephone line for
transmission (indicated by “AUTO” on the LCD display).
• If you wish, you can change which telephone line the
machine should use by selecting Line-1 or Line-2 with the
key on the Control Panel.
Continued on the next page...
ENTER STATION(S)
THEN PRESS START 00%
MEM XMT
5
5
5
1
2
3
4
LINE SELECT
TEL. NO. (AUTO)
5551234
❚
Sending Documents
Note3