Panasonic AS200 - Manual (Page 64)

BASIC OPERATIONS
62
Redialling
Automatic Redialling
Manual Redialling
You can also redial the last dialed number manually by pressing key.
To redial the last dialed number through memory
(see Note 1)
If a busy line is detected, the machine will redial the number up
to 5 times at 3 minutes interval. However, if a busy line is not
detected, the machine will redial only one time. During that time,
a message will appear as shown to the right.
A file number is shown in the upper right hand corner of the
display if it is a memory transmission file.
Make sure that the FAX lamp is ON. If not, press to select the "FAX MODE".
1
Set document(s) face down.
Make sure that the MEMORY lamp is on.
2
3
The document is stored into memory with a file number.
Then dials the last dialed number.
NOTE
1. While the unit is displaying "WAIT TO DIAL", you can press to start redialling immediately.
WAIT TO DIAL NO.001
(Telephone number)
REDIAL
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
* STORE * NO.002
PAGES=001 01%
* DIALLING * NO.002
5551234
REDIAL
Sending Documents