Panasonic AS200 - Manual (Page 97)

ADVANCED FEATURES
ADV
ANCE
D
FE
ATURE
S
95
Printing Documents
After receiving a document with the Receive To Memory feature, the following message will appear on the
display.
To print the documents, follow the steps below.
(see Note 1) (see Note 2)
Make sure that the FAX lamp is ON. If not, press to select the "FAX MODE".
1
2
3
4
5
Enter the password to print the documents.
(See Note 1)
Ex:
6
Machine will start to print the documents.
NOTE
1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing in step 4.
2. Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax Parameter No. 037
will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY feature to
“Off” first. Then change the password. (See page 94)
MESSAGE IN MEMORY
< RCV TO MEMORY >
SELECT MODE (1-5)
ENTER NO. OR
∨ ∧
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
INPUT PASSWORD
❚❚❚❚
1 2 3 4
INPUT PASSWORD
1234
* PRINTING *
MEMORY RCV’D DOC
SET
Receive To Memory