Polycom KIRK 14117800 - Manual (Page 120)

120 Configuring KIRK Wireless Server 600v3
14117800, Ed.2.6
3 Click OK.
4
Click Reset (under Administration menu) to save your configuration.
The LDAP Server is now configured.
7.6.7 Configuring Alternative LDAP Server
Working with LDAP Servers, you can also define a KWS600v3 to be an alternative LDAP
Server. In case the LDAP Server stops working, the alternative LDAP Server will take
over the LDAP Replication to the radio units.
Note:
In case the Master KWS600v3 and the LDAP Server is the same unit, the alternative
LDAP Server will also take the role as the Master KWS600v3 if the LDAP Server stops
working.
Note: The alternative LDAP Server can be used as the alternative (Standby) Master
KWS600v3. This configuration is not recommended if the installation requires an LDAP
Server.
Figure 62
WS600v3 Multi-cell installation with Alternative LDAP Server
This section contains information about:
• “Setting LDAP Mode (Alt. LDAP Server)” on page 121
• “Setting LDAP Replicator (Alt. LDAP Server)” on page 121