Table 5, Error messages in configuration tool – Polycom KIRK 14117800 User Manual

Page 200

Advertising
background image

200

Troubleshooting

14117800, Ed.2.6

15.1.2 KIRK Configuration Tool for KIRK Wireless Server 600v3

The error messages that may occur in the Configuration Tool are described in the

following table.

Table 5

Error Messages in Configuration Tool

Problem

Action required

Get button is grayed -

cannot click on it

The Get button uses the IP address to look up the host name. The Get

button is only enabled, if the DHCP check box is disabled.

The application fails

to resolve the host

name

Check that you are online, and that IP address is correct and valid to the

network.

LDAP Server tab is not

visible

Check that the Master is LDAP Server check box in the Master tab is

deselected.

One or more Host

Names not filled!

When trying to save configuration files, all host names for the selected

devices to be saved, must be defined. On the Master tab/Sync Master tab,

empty host name fields are marked with a red exclamation mark. On the

Secondaries tab, look for missing host names in the Host Name column.

No DECT firmware

and System ARI code

on all radio units with

active radios.

Check if radio firmware is missing. Check if radio is disabled

Upload of firmware

failed

Check if you are uploading valid firmware files. Check if you are uploading

radio firmware as IP firmware. Check if communication between PC and

radio unit is interrupted.

Password mismatch

Check that the password is correct (small letters, capital letters etc.). If

password has been changed, the new password must be used for the whole

installation.

Long name missing

You need to type a long name. Using Skinny and H.323 Protocol, type SEP

followed by the IPEI number of the handset. The IPEI number is found

either on a label under the battery, on the packaging label, or by pressing

*99984*

3

on the handset to be registered. The serial number consists of a

five-digit handset type (manufacturer code) and a seven-digit handset

number. Using SIP Protocol, type any name.

Cn already exists

Long name already exists.

IPEI too long

IPEI too short

The serial number (IPEI) consists of a five-digit handset type (manufacturer

code) and a seven-digit handset number.

Table 4

Error Messages on the Administration Page

Problem

Action required

Advertising
This manual is related to the following products: