5 charging kirk handsets, 1 using the charger, Figure 4 – Polycom KIRK 14117800 User Manual
Page 70: Single charger for 3040 handset, Figure 5, Single charger for 4020 handset and 4040 handset, Charging kirk handsets
Advertising
70
Preparing KIRK Handset for Use
14117800, Ed.2.6
6.5 Charging KIRK Handsets
6.5.1 Using the Charger
Each handset is charged through the use of a handset charger, a compact desktop unit
designed to charge and automatically maintain the correct battery charge levels and
voltage.
The charger for 3040/4020/4040/4080 Handset is powered by an AC (115VAC or
230VAC) adapter that supplies the 9VDC at 230mA charger requirement.
The charger for 5020 / 5040 Handset is powered by an AC (110VAC to 240VAC) adapter
that supplies the 8VDC at 350mA charger requirement.
Note:
Multicharger is only available in EMEA.
Figure 4
Single Charger for 3040 Handset
Figure 5
Single Charger for 4020 Handset and 4040 Handset
Advertising
This manual is related to the following products: