Panasonic AJ-HD150FE - Manual (Page 110)

– 110 –
RS-232C interface
3) Return format [VTR
→
controller (PC)]
The following responses are made to the command. If necessary, more than one response is made.
■ When the communication has terminated normally
1. The receive completion message is returned.
[ACK]
06h
2. The execution completion message is returned.
[STX] [command] [data] [ETX]
02h XX XX XX XX-XX 03h
• [command]: This is the message (data) which is returned or the execution completion message identifier.
• [data]: This is the data to be returned. It can be omitted.
Example: Send command Return message (data)
[STX] OPL [ETX]
→
[ACK] [STX] OPL [ETX]
■ When the communication has terminated abnormally
[NACK]
15h
■ When processing is not possible due to incorrect data or trouble in the VTR
1. The receive completion message is returned.
[ACK]
06h
2. An error code is returned.
[STX] E R N 1 N 2 N 3 [ETX]
02h Error code 03h
4. Error code table
ER001: Invalid command
• Unsupported command received.
• Error in command execution
ER002: Parametre error
ER102: VTR mode error (front loading motor)
ER103: VTR mode error (loading motor)
ER104: VTR mode error (drum, capstan system)
ER105: VTR mode error (reel system)
ER106: VTR mode error (tension system)
ER108: VTR dew error
ER1FF: VTR system error