Specifications – Panasonic AJ-HD150FE User Manual
Page 118
– 118 –
Specifications
GENERAL
Power supply:
AC 220 – 240 V, 50 – 60 Hz
Power consumption: 220 W
Operating ambient temperature:
5°C to 40°C
Operating ambient humidity:
10% to 90% (no condensation)
Weight:
20 kg
Dimensions (W
×
H
×
D):
424 (max. 435.4)
Ч
175.2
Ч
448.9 mm
(Not including the support legs, connectors, JOG dial and fan)
Recording format:
DVCPRO HD
Recording video signal:
1080i/720p, 59.94 Hz/60 Hz selectable
Recording audio signal:
48 kHz, 16 bits, 8 channels
Recording tracks:
Digital video/audio: helical track
The time code is recorded in the sub-code area.
Cue track:
1 track
Control track:
1 track
Tape speed:
135.28 mm/sec
Recording time:
46 minutes (using the AJ-HP46LP)
32 minutes (using the AJ-HP32LP)
Tape:
Metal tape
FF/REW time:
Approx. 1 min (with AJ-HP46LP)
Search speed:
±50
×
speed (colour)
Digital slow:
Plus direction:
1
×
speed
Minus direction:
–1
×
speed
Editing accuracy:
±0 frames (using the time code)
Tape timer accuracy:
±1 frame (using the continuous CTL signal)
Servo lock time:
Less than 0.3 sec (standby ON)
Loading time:
Approx. 3 sec
Audio split editing:
YES
VIDEO
Sampling frequencies:
Y: 74.25 MHz, P
B
/P
R
: 37.125 MHz
Quantizing:
8 bits
Video compression method:
DCT + variable length code
Video compression rate:
1/6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
Video input connector
HD serial digital input:
BNC
×
1, complies with SMPTE 292M standard
HD reference input:
BNC
×
2, loop-through, 75
Ω
on/off
SD reference input:
BNC
×
2, loop-through, 75
Ω
on/off
Video Output Connector
HD serial digital output:
BNC
×
3, complies with SMPTE 292M standard
OUT3 (superimpose on/off)
Serial digital component output:
BNC
×
3, complies with SMPTE 259M-C/294M standard,
OUT3 (superimpose on/off)
HD reference output:
BNC
×
1
SD reference output:
BNC
×
1
Analogue composite output:
BNC
×
3, video 1, video 2 (WFM OUT), video 3 (superimpose on/off)
Output during SD playback or when the down-converter is installed
Video Signal Adjustment
HD SDI Y output gain:
–
¶
to +3 dB
HD SDI P
B
output gain:
–
¶
to +3 dB
HD SDI P
R
output gain:
–
¶
to +3 dB
HD SDI Y black level:
±10%
is the safety information.