Panasonic AJ-HD150FE - Manual (Page 53)

– 53 –
IC CARD function
IC CARD mode selection
In <Expansion mode selection> status with MODE/SEL button g pressed, IC CARD mode can be
selected.
When EXIT button
h is pressed, the mode changes from IC CARD to normal mode.
Outline
The management of the setup menu using IC CARD, and system file and user file (USER1~USER5)
loading (reading from IC card)/saving (storing into IC card) can be performed.
<Note>
The system file and user file (USER2-USER5) are provided with a lock mode to protect the settings.
The system file can be set by the setup menu No. 30 (MENU LOCK), and the user file, by the setup
menu No. A03 (MENU LOCK).
In the above menu, loading (reading from IC card) is executed even when the lock mode has been set.
* Usable cards are battery replaceable SRAM cards (64KB or over) of 68-pin two-piece type.
It is recommended to use Model BN-064HSR.
SYSTEM
USER1
USER2
USER3
USER4
USER5
IC CARD
Load/Save
Load/Save
Load/Save
Load/Save
Load/Save
Load/Save