Panasonic AJ-HD150FE - Manual (Page 72)

– 72 –
Setup menus
USER menu
<OPERATION>
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
100 SEARCH 0000 DIAL
ENA 0001 KEY
101 SHTL MAX 0000
Ч
8.4
0001 Ч 16
0002
Ч
32
102 FF. REW 0000 × 16
MAX 0001 Ч 32
0002
Ч
50
0003 Ч 60
0004
Ч
100
104 REF 0000 OFF
ALARM 0001 ON
105 AUTO EE 0000 S/F/R
SEL 0001 STOP
106 EJECT EE 0000 EE
SEL 0001 BLACK
0002 GRAY
The underline on the setting item denotes the initial setting.
This selects the direct search dial operation.
0: For direct search dial operations.
1: Operation is not transferred to the search mode unless the
search button is pressed.
This sets the maximum speed for shuttle operations.
0: 8.4
×
normal speed
1: 16
×
normal speed
2: 32
×
normal speed
<Note>
Depending on the tape format, the actual tape travel speed
will differ slightly from what the superimposed display shows.
This sets the maximum speed for FF and REW operations.
0: 16
×
normal speed
1: 32 × normal speed
2: 50
×
normal speed
3: 60
×
normal speed
4: 100
×
normal speed
<Note>
The maximum speed is automatically limited to 50
× for
DVCPROHD and 32
×
for DV or DVCAM.
This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
This selects the VTR mode in which the EE status is to be
established when the TAPE/EE switch has been set to EE.
0: The EE status is established in the stop, FF or REW mode.
1: The EE status is established in the stop mode only.
<Note>
The EE output with the DVCPRO50, DVCPRO, DV or DVCAM
format is characterized by a black picture and muted sound.
With setup menu No.118 (SD MODE INH) OFF, EE output is
given in DVCPRO50/DVPRO format mode.
This selects the video and audio output statuses in the eject
mode.
0: The EE status is always established regardless of the
TAPE/EE switch position.
1: The statuses depend on the TAPE/EE switch position:
EE: The EE status is established.
TAPE: The video signals turn black; the audio signals are
muted.
2: The statuses depend on the TAPE/EE switch position:
EE: The EE status is established.
TAPE: The video signals turn gray; the audio signals are
muted.
<Note>
The EE output with the DVCPRO50, DVCPRO, DV or DVCAM
format is characterized by a black picture and muted sound.