Panasonic AJ-HD150FE - Manual (Page 87)

– 87 –
Setup menus
USER menu
<VIDEO> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
670 CC (F1) 0000 BLANK
BLANK* 1 0001 THRU
671 CC (F2) 0000 BLANK
BLANK* 1 0001 THRU
672 VO SETUP 0000 THRU
(SD)* 1 0001 ADD22L
0002 ADD21L
0003 ADD20L
673 EDH 0000 OFF
(SD)* 1 0001 ON
674 ESR MODE 0000 OFF
(SD)* 1 0001 AUTO
675 CCR MODE 0000 OFF
(SD)* 1 0001 ON
676 SDI 0000 OFF
INDEX O* 1 0001 ON
677 VO SETUP 0000 THRU
(HD)* 2 0001 ADD22L
0002 ADD21L
0003 ADD20L
The underline on the setting item denotes the initial setting.
* 1 : With the SD output (SD tape playback or down-conversion output)
* 2 : With the HD output (HD tape playback or up-conversion output)
For selecting whether to turn the closed caption signals in the
first field ON or OFF.
0: The signals are forcibly blanked.
1:
The signals are not blanked.
For selecting whether to turn the closed caption signals in the
second field ON or OFF.
0: The signals are forcibly blanked.
1: The signals are not blanked.
This selects the composite output signal in SD mode.
0: The signal is output with no setup added.
1: The signal is output from 22 line with a 7.5% setup added.
2: The signal is output from 21 line with a 7.5% setup added.
3: The signal is output from 20 line with a 7.5% setup added.
This selects whether EDH is to be superimposed onto SERIAL
OUT.
0: EDH is not superimposed.
1: EDH is superimposed.
This selects the edge subcarrier reduction (ESR) operation
mode in the playback circuitry.
0: ESR is forcibly set to OFF.
1: ESR is automatically set to ON or OFF depending on the
VTR operation.
This selects the processing for cross colour during playback.
0: The cross colour is output as is.
1: The cross colour can be reduced.
For selecting whether the VIDEO INDEX signal is to be
superimposed onto the SD SDI output.
0: The VIDEO INDEX signal is not superimposed onto the SD
SDI output.
1: The VIDEO INDEX signal is superimposed onto the SD
SDI output.
This selects the composite output signal in HD mode.
0: The signal is output with no setup added.
1: The signal is output from 22 line with a 7.5% setup added.
2: The signal is output from 21 line with a 7.5% setup added.
3: The signal is output from 20 line with a 7.5% setup added.