Panasonic AJ-HD150FE - Manual (Page 93)

– 93 –
Setup menus
USER menu
<AUDIO> (continued)
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
736 CUE SLOW 0000 STEP
0001 LINEAR
737 CH1 CUE 0000 OFF
SEL 0001 ON
738 CH2 CUE 0000 OFF
SEL 0001 ON
739 CH3 CUE 0000 OFF
SEL 0001 ON
740 CH4 CUE 0000 OFF
SEL 0001 ON
741 CH5 CUE 0000 OFF
SEL 0001 ON
742 CH6 CUE 0000 OFF
SEL 0001 ON
743 CH7 CUE 0000 OFF
SEL 0001 ON
744 CH8 CUE 0000 OFF
SEL 0001 ON
The underline on the setting item denotes the initial setting.
For selecting the tape travel status (cue track playback status)
during slow-motion playback.
0: The output picture takes precedence, and the tape travels
at the STEP speed.
1: The cue track playback takes precedence and the tape
travels at the linear playback speed.
<Notes>
When “1” (LINEAR) has been selected:
• Set the TC/CTL switch to the TC position because the CTL
counter may not function properly.
• The picture may not appear as clearly as in the STEP mode.
This selects whether the CUE signal is to be output to the
main line of CH1 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH2 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH3 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH4 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH5 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH6 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH7 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.
This selects whether the CUE signal is to be output to the
main line of CH8 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.