Pioneer SUPER TUNERIII DEH-P8650MP - Manual (Page 29)

Playinga CD
1
4
3 2
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1 Play time indicator
Shows the elapsed playing time ofthe cur-
rent track.
2 Disc number indicator
Shows the disc currently playing.
3 Track number indicator
Shows the track currently playing.
4 Disc title indicator
Shows the title ofthe currently playing disc.
! Ifno title has been entered for the cur-
rently playing disc, nothing is displayed.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi CD dis-
played.
2 Select a disc you want to listen to with
the 16 buttons.
For discs located at 1 to 6, press the corre-
sponding button number.
Ifyou want to select a disc located at 7 to 12,
press and hold the corresponding numbers,
such as 1 for disc 7, until the disc number ap-
pears in the display.
# You can also sequentially select a disc by
pushing MULTI-CONTROL up or down.
3 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
4 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing MULTI-CONTROL right skips to the
start ofthe next track. Pushing
MULTI-CONTROL left once skips to the start
ofthe current track. Pushing again will skip to
the previous track.
Notes
! When the multi-CD player performs the pre-
paratory operations, Ready is displayed.
! Ifthe multi-CD player does not operate prop-
erly, an error message such as ERROR-11
may be displayed. Refer to the multi-CD player
owners manual.
! Ifthere are no discs in the multi-CD player ma-
gazine, No disc is displayed.
! When you select a disc, the disc and track ti-
tles automatically begin to scroll in the dis-
play. When Ever Scroll function is ON at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll on page 60.
Selectinga track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
Multi-CD Player
En
29
English
Section
07