Pioneer SUPER TUNERIII DEH-P8650MP - Manual (Page 35)

# No disc is displayed next to the disc number
when there is no disc in the magazine.
# To return to the playback display, press
BAND/ESC.
UsingCD TEXT functions
You can use these functions only with a CD
TEXT compatible multi-CD player.
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displayingtitles on CD TEXT discs
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
: track title : disc title and : disc artist
name : disc artist name and : track title
 : track title and : track artist name :
track artist name and : track title
# If specific information has not been recorded
on a CD TEXT disc, title or name is not displayed.
Scrollingtitles in the display
This unit can display the first 14 (22) letters of
disc title, disc artist name, track title and track
artist name. When the text information is long-
er than 14 (22) letters, you can scroll the dis-
play as follows.
% Press DISPLAY and hold until the title
begins to scroll through the display.
The titles scroll.
Note
When Ever Scroll is set to ON at the initial setting,
CD text information scrolls continuously in the
display. Ifyou want to display the first 14 (22)
characters oftext information temporarily and
scroll from the beginning, press and hold
DISPLAY. About Ever Scroll, refer to Switching
the Ever Scroll on page 60.
Selectingtracks from the track
title list
Track title list lets you see the list oftrack titles
on a CD TEXT disc and select one ofthem to
play back.
1 Turn MULTI-CONTROL to switch to the
disc title list mode.
2 Use MULTI-CONTROL to select the de-
sired disc title of CD TEXT.
Turn to change the disc title; press to play.
# You can also change the disc title by pushing
MULTI-CONTROL up or down.
# Ifno title has been entered for a disc, No title
will be displayed.
# No disc is displayed next to the disc number
when there is no disc in the magazine.
3 Push MULTI-CONTROL right to switch
to the track title list.
4 Use MULTI-CONTROL to select the de-
sired track title.
Turn to change the track title; press to play.
# You can also change the track title by pushing
MULTI-CONTROL up or down.
# To return to the playback display, press
BAND/ESC.
Multi-CD Player
En
35
English
Section
07