Panasonic DP-135FP - Manual (Page 52)

52
(see Note 1) (see Note 2) (see Note 3)
ADF Scanning
4
a
The machine starts to dial the telephone number.
Platen Glass (Flatbed) Scanning
4
b
When an original is placed on the Platen Glass,
the display is as shown to the right.
Press or to select the size of the original on the
Platen Glass and press to start dialing.
NOTE
1. If you need a special access number to get an outside line, dial it first then press to enter a
pause (represented by a "-") before dialing the full number.
Ex : 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
(represented by a "/").
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex : 9 PAUSE TONE 5551234
3. To stop the transmission, press .
The display shows:
Press " 1 " to stop the transmission. The Communication Journal will not print regardless of the printout mode
setting of the Communication Journal.
* DIALING *
5551234
START
ORIGINAL=LETTER
PRESS START
REDIAL/PAUSE
TONE
CLEAR/STOP
COMMUNICATION STOP?
1:YES 2:NO
Sending Documents