Panasonic DP-135FP - Manual (Page 92)

MAINTENANCE
92
Adding Paper
See Operating Instructions (For Copier) P.21
Adding Toner
See Operating Instructions (For Copier) P.23
Removing Paper Jams
See Operating Instructions (For Copier) P.25 ~ 28
Print Copy Quality
Vertical lines printing
on the received
document Print a Journal report (e.g. FUNCTION, 6, 1 , SET and 1) and
check the quality to make sure whether your machine has
trouble.
If the Journal report quality is OK, your machine has no
problem, report to the sending party that they have a problem.
If copy is NG, replace the Toner Cartridge. 79
94
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
--
Missing dots or lines/
inconsistent darkness
within print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Replace the Toner Cartridge.
--
94
Fading print Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge. 94
Faint print You may need to choose a different paper for the best possible
print quality. --
Communication
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line. 97
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document from memory, which also happens
to be the 40th transaction, the machine will not auto answer
until the Transaction Journal completes printing.
97
58
Cannot transmit or
receive An information code will be shown on the display. Refer to the
information code table to find out the trouble. 89
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again. --
Mode Symptom Cause / Action page
Troubleshooting