Panasonic KXTG4321 - Manual (Page 23)

Programming
23 For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*5 If you select one of the melody ringer tones, the ringer tone will continue to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*6 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at “700ms” unless pressing
{
FLASH} fails to pick up the waiting call.
Ring count { 2}{1}{1} { 2}–{7}: 2–7 rings <4>
{ 0}: Toll saver
r 34
Ringer tone
*4, *5
(Handset)
{ 1}{6}{1} { 1}–{3}: Tone <1>–3
{ 4}–{7}: Melody 1–4
– –
Ringer volume
(Handset) { 1}{6}{0} { 1}: Low {2}: Medium
{
3}: <High> {0}: Off
– –
Set dial mode { 1}{2}{0} { 1}: Pulse
{ 2}: <Tone>
r 14
Set flash
time
*6
{ 1}{2}{1} { 1}: <700ms>
{ 2}: 600ms
{ 3}: 400ms
{ 4}: 300ms
{ 5}: 250ms
{ 6}: 110ms
{ 7}: 100ms
{ 8}: 90ms
r 16
Set line mode *7
{ 1}{2}{2} { 1}: A {2}: <B> r –
Store VM
access# {
3}{3}{1} –
r
36
Time
adjustment
*8
(Caller ID
subscribers only)
{ 2}{2}{6} { 1}: <Caller ID
[auto]>
{
0}: Manual
r –
V.M. access { 3}{3}{0} – – 37
VM tone detect {
3}{3}{2}
{
1}: <On> {0}: Off
r
36
Voice prompt
(Change language) { 1}{1}{2} { 1}: <English>
{ 2}: Español
r 14
Feature Feature
code Setting code System
setting
*1
Page
TG43xx_OI.book Page 23 Tuesday, December 11, 2007 2:04 PM