Panasonic PT-DZ6700U - Manual (Page 4)

Our newly-developed 300-watt AC lamps are
used in the PT-DZ6710U/DZ6700U. The
high-efficiency light convergence technology
and independently developed color wheel work
together to achieve the high brightness of
6,000 lm. Clear, crisp images are reproduced
even in bright rooms.
High Brightness 6,000 lm with New AC Lamp
Image details are less clear when a projector is used in a room with the
lights on. This problem becomes more significant when images require
increasing levels of detail expression. Panasonic's System Daylight View 2
optimizes image quality to improve color perception of the projected image
in bright rooms. Gamma curves and sharpness, in addition to conventional
color correction are adjusted to bring a sense of sharpness to the entire
screen and reproduce stunning images with life-like depth. This results in
highly comfortable viewing even in bright lighting, and allows viewers to
concentrate more easily on the images.
System Daylight View 2 for Enhanced Color Perception
The use of a full 10-bit image processing system provides smooth tonal
expression. For example, skin tones appear natural and true to life.
Full 10-bit Picture Processing
Images are noticeably clearer, thanks to higher-performance frame noise
reduction, which lowers image graininess, and improved MPEG noise
reduction, which suppresses the block noise and mosquito noise that are
common in fast-action scenes.
More Effective Noise Reduction
This interlace/progressive conversion technology automatically detects
when the input signal is derived from filmed material and selects the
optimum progressive processing method to assure faithful reproduction of
the original image.
Progressive Cinema Scan (3/2 Pulldown)
The dynamic sharpness control circuit adjusts the video signal waveforms
based on the difference in brightness of adjacent pixels for a sharp, clear
picture that is relatively unaffected by signal noise.
Dynamic Sharpness Control
To increase visual impact, projector images are often viewed from a
comparatively close position relative to the screen size. The characteristics
of the human eye, however, tend to cause changes in colors when images
are viewed close-up on a large screen. Changes in color saturation, hue,
and brightness differ from color to color, and conventional projectors were
not able to make the appropriate corrections. 3D Color Management
makes these corrections to produce accurate colors that are very close to
the original images even when viewed on a large screen.
3D Color Management System
This advanced image-processing circuit analyzes the video signal
frequency range for each scene by extracting data on the distribution of
high, mid, and low-frequency components, and brings out fine details
accordingly. The resulting images have a more natural, three-dimensional
appearance with crisp, clear detail.
Detail Clarity Processor Brings Depth and
Clarity to Details
Conventional sharpness control:
Sharpness is applied uniformly, which can
cause a halo or ring effect and diminish the
sense of depth.
Detail Clarity Processor:
Signal frequency is extracted real-time and
necessary sharpness is applied at varying
degrees for natural, life-like images.
Without With
ON OFF
Original
image
Without
compensation
After
compensation
Newly-developed
AC Lamp
3