Panasonic AJ-SDd93 - Manual (Page 22)

– 22 –
Setup menus (continued)
USER menu <BASIC>
The underlined items indicates the initial setting.
No./Item Description
009
CHARA H-POS
This sets the position of the characters
on the horizontal plane for the time
code and other super displays output to
the VIDEO MON connector.
Note:
Press the joystick, then you can set
the position of the characters by
inclining it up or down or to the left or
right.
0000 0
: :
0004 4
: :
0016 16
010
CHARA V-POS
This sets the position of the characters
on the vertical plane for the time code
and other super displays output to the
VIDEO MON connector.
Notes:
• Press the joystick, then you can set
the position of the characters by
inclining it up or down or to the left or
right.
• When the DISPLAY SEL status
causes characters to extend beyond
the edges of the screen, the setting
value is changed but the characters
are automatically displayed at a
position on the screen where they will
not extend.
(For AJ-SD93E)
0000 0
: :
0023 23
: :
0028 28
(For AJ-SD93P)
0000 0
: :
0018 18
: :
0022 22
011
CHARA TYPE
This selects the display type for the
super display output to the VIDEO
MON connector as well as for displays
such as the setting menu, etc.
0000 WHITE :
White characters against a black
background.
0001 W/OUT :
White characters with a black
border.
No./Item Description
012
SYS FORMAT
This sets the VTR’s recording and
playback format.
0000 50M :
DVCPRO50 (50 Mbps) is selected.
0001 25M :
DVCPRO (25 Mbps) is selected.
Note:
The format complies with the setting of
this menu item when the tape is
ejected.
017
CHARA SIZE
This selects the size of the
characters for the superimposed
display output from the VIDEO MON
connector.
0000 NORMAL : Standard size
0001
LARGE :
4 times larger than the standard
size
Note:
When LARGE has been selected, only
time data is displayed, regardless of
the setup menu No.008 (DISPLAY
SEL) setting.
013
PB FORMAT
This sets the format in which the
tape is to be played back.
0000 MANUAL :
The format complies with the setting
of setup menu No. 012 (SYS
FORMAT) when a DVCPRO
cassette is inserted. The format
complies to the format recorded on
the tape when a DV or DVCAM
cassette is inserted.
0001 AUTO :
The format complies with the format
recorded on the tape.
Note:
When AUTO has been selected, the
picture and sound may be disturbed
until the format is detected after a tape
is loaded.