Panasonic AJ-SDd93 - Manual (Page 23)

– 23 –
Setup menus (continued)
USER menu <OPERATION>
The underlined items indicates the initial setting.
No./Item Description
100
SEARCH ENA
This sets the method used to transfer
to the search mode (stick operation).
0000 STICK :
Operation transfers to the search
mode when the SEARCH button is
pressed or the stick is operated.
0001 KEY :
Operation is not transferred to the
search mode unless the SEARCH
button is pressed.
101
SHTL MAX
This sets the maximum speed for
shuttle
0000 x8.4 : 8.4x normal speed
0001 x16 : 16x normal speed
0002 x32 : 32x normal speed
104
REF ALARM
This selects whether to warn the
operator when the REF. VIDEO
signal has not been connected.
0000 OFF :
Warning is not given.
0001 ON :
Warning is given by the flashing
STOP lamp.
Note:
Video and audio output may be disturbed
when the reference video signal is not
input, so it is recommended that a
system which inputs the reference video
signal be used.
102
FF. REW MAX
This sets the maximum speed for
FF and REW operations.
0000 x16 : 16(32)x normal speed
0001 x32 : 32(60)x normal speed
0002 x50 : 50(100)x normal speed
Notes:
• The speeds given in the parentheses
apply in the DVCPRO (25 Mbps), DV
and DVCAM mode.
• With mini DV or mini DVCAM cassette,
the maximum speed is set to 32x
regardless of this item’s settings.
107
PLAY DELAY
This set the play delay time in frame
increments.
0000 0
: :
0015 15
108
CAP.LOCK
This selects the CAPSTAN LOCK
mode.
Note:
Color framing for the VIDEO MON
connector output is not guaranteed.
(For AJ-SD93E)
0000 2F : 2F mode
0001 4F : 4F mode
0002 8F : 8F mode
(For AJ-SD93P)
0000 2F : 2F mode
0001 4F : 4F mode
No./Item Description
111
FRZ MODE
SEL
This selects the output picture in the
STANDBY OFF (HALF LOADING) and
EJECT modes.
0000 DIS:
The video output is muted.
0001 STB OFF:
When the STANDBY OFF (HALF
LOADING) mode is established, the
picture being played back at the time is
frozen and output.
0002 SOF&EJ:
When the STANDBY OFF (HALF
LOADING) or EJECT mode is
established, the picture being played
back at the time is frozen and output.
Notes:
• The freeze status complies with the setup
menu item No.605 (FREEZE SEL) setting.
•The playback screen freezes only
when setup menu No. 122 (STOP EE
SEL) is set to STOP.
• In the EJECT mode, the freeze image is
output only when BLACK or GRAY is
selected as the setup menu item No.120
(EJECT EE SEL) setting.
109
AUTO REW
This selects whether to rewind the
tape automatically to the tape start
when the tape end is detected.
0000 OFF :
The tape stops at the tape end.
0001 ON :
The tape is rewound to the tape start.
Note:
The tape stops near the BEGIN point
when setup menu No. 160 (MEMORY
MODE) is set to M-STOP.
112
V IN SEL INH
This selects whether video input
switching using the INPUT SELECT
button is to be enabled or disabled.
0000 OFF :
Video input switching using the
INPUT SELECT button is enabled.
0001 ON :
Video input switching using the
INPUT SELECT button is disabled.
0002 REC :
Video input switching using the
INPUT SELECT button after the unit
has been transferred to a recording
(but not editing) mode is disabled.
113
A IN SEL INH
This selects whether audio input
switching using the INPUT SELECT
button is to be enabled or disabled.
0000 OFF :
Audio input switching using the
INPUT SELECT button is enabled.
0001 ON :
Audio input switching using the
INPUT SELECT button is disabled.
0002 REC :
Audio input switching using the
INPUT SELECT button after the unit
has been transferred to a recording
(but not editing) mode is disabled.
YA93P
YA93P
This appears only when the optional board
AJ-YA93P has been installed. YA93P