Panasonic AJ-SDd93 - Manual (Page 33)

– 33 –
No./Item Description No./Item Description
USER menu <DIF>
880
DIF SPEED
This sets the transfer rate of the IEEE
1394 digital interface output.
0000 S100 : 100 Mbps
0001 S200 : 200 Mbps
0002 S400 : 400 Mbps
881
DIF TYPE
(For AJ-SD93P)
This sets the format when the IEEE
1394 digital signals are output.
0000 DVCPRO :
The signals are forcibly output in the
DVCPRO format.
0001 DV :
The signals are forcibly output in the
DV format.
0002 AUTO :
During playback, the playback tape
format takes priority. During EE, the
setting in setup menu No. 012 (SYS
FORMAT) takes priority.
Note:
If the format during playback and EE is
DVPRO50, the signals are output in
DVPRO50 format regardless of this
menu setting.
882
DIF IN CH
This sets the IEEE 1394 digital input
channel.
0-63: These channels are fixed to
assigned values.
0064 AUTO :
The channel is not fixed to assigned
values. When the power is turned on,
the input channel is initialized to 63.
0000 0
: :
0063 63
883
DIF OUT CH
This sets the IEEE 1394 digital output
channel.
0-63: These channels are fixed to
assigned values.
0064 AUTO :
The channel is not fixed to assigned
values. When the power is turned on,
the output channel is initialized to 63.
0000 0
: :
0063 63
886
DIF CONFIG
This menu item is used to support
future expansion. Normally, “DFLT” is
used as the setting.
0000 DFLT
0001 1
: :
0255 255
889
DIF AUD IN
(For AJ-SD93P)
This selects the channels to be used
for recording on the tape when DV
format data with audio signals in the
4CH mode are to be input and then
recorded on a DVCPRO tape.
0000 CH1&2 :
Received DV format data CH1 and
CH2 are selected.
0001 CH3&4 :
Received DV format data CH3 and
CH4 are selected.
891
DIF DV AUDIO
This sets the forced audio mode
conversion when a DV tape is played
and its signals are output in the DV
format.
0000 THRU : Normal (through)
0001 LOCK :
The audio mode is forcibly
converted to the LOCK mode. (The
frequency is not converted.)
0002 LOCK48 :
The audio mode is forcibly
converted to 48 kHz/2CH/LOCK.
890
DIF AUD OUT
(For AJ-SD93P)
This selects the channels when a
DV tape with audio signals in the
4CH mode is played and the signals
are output in the DVCPRO format or
when LOCK48 has been selected as
the setup menu item No.891 (DIF DV
AUDIO) setting.
(For AJ-SD93E)
When setup menu No. 891 (DIF DV
AUDIO) is set to LOCK48, this
selects the output channels for
playing back the DV tape with audio
signals in 4CH mode.
0000 CH1&2 :
DV tape CH1 and CH2 are selected.
0001 CH3&4 :
DV tape CH3 and CH4 are selected.
Setup menus (continued)
The underlined items indicates the initial setting.