Panasonic AJ-SDd93 - Manual (Page 43)

– 43 –
Specifications
Power supply: AC 100 - 240 V, 50 / 60 Hz
Power consumption: 52 W
Operating ambient temperature:
5 °C to 40 °C (41 °F to 104 °F)
Operating ambient humidity:
10 % to 80 % (no condensation)
Weight:
6.8 kg (14.99 lb)
Dimensions:
214 (W) x 132 (H) x 434 (D) mm
(8 7/16 x 5 3/16 x 17 3/32 inches)
(excluding support legs and connectors)
Recording format:
DVCPRO50/DVCPRO format selectable
Recording video signals:
For AJ-SD93P: 525i system
For AJ-SD93E: 625i system
Recording audio signals:
DVCPRO50 : 48 kHz, 16 bits, 4 channels
DVCPRO
: 48 kHz, 16 bits, 2 channels
Recording tracks:
Digital video/audio
Helical track
Time code is recorded in the sub-code area.
Control (CTL): 1 track
Tape speed:
For AJ-SD93P
67.640 mm/sec. (DVCPRO50)
For AJ-SD93E
67.708 mm/sec. (DVCPRO50)
Recording times:
92 minutes (with AJ-5P92LP)
33 minutes (with AJ-5P33MP)
Tapes used:
Metal tapes
FF/REW time:
Less than 3 min. (with AJ-5P92LP)
Less than 2 min. (with AJ-5P33MP)
Digital slow:
-0.43x to +0.43x (DVCPRO, DVCPRO50)
Tape timer accuracy:
±1 frame (when using continuous CTL signal)
Servo lock time:
Less than 0.5 sec. (When the format for 2Fmode,
standby ON, or setup menu No. 012 (SYS FORMAT)
is the same as the format recorded to the tape)
VIDEO
Digital video
Sampling frequency:
Y:13.5 MHz; PB/PR: 6.75 MHz (DVCPRO50)
Quantizing:
8 bits
Video compression method:
DV-Based compression (SMPTE 314M)
Video compression rate:
DVCPRO50: 1/3.3
DVCPRO
: 1/5
Error correction:
Reed-Solomon product code
Bit rate:
DVCPRO50: 50 Mbps
DVCPRO
: 25 Mbps
Digital IN/Analog Component OUT
Video bandwidth (when using AJ-YA93P, AJ-
YA94G options):
For AJ-SD93P
Y : 30 Hz to 5.5 MHz (±1 dB),
5.75 MHz (–2 dB)
PB/PR : 30 Hz to 2.5 MHz (±1 dB),
2.75 MHz (–2 dB)
For AJ-SD93E
Y : 25 Hz to 5.5 MHz (±1 dB),
5.75 MHz (–2 dB)
PB/PR : 25 Hz to 2.5 MHz (±1 dB),
2.75 MHz (–2 dB)
S/N ratio:
Better than 58 dB (Y)
K factor:
Less than 1 % (Y 2T)
Y/PB/PR delay:
Less than 10 nsec.
Video input signals
Analog component input (option: AJ-YA93P):
BNC x 3 (Y, PB, PR) (also used as VIDEO IN
connectors)
For AJ-SD93P
Y : 1.0 V[p-p]
PB/PR : 0.486/0.7 V[p-p] selectable
(75 Ω, 75 % color bar, 7.5 % setup level)
For AJ-SD93E
Y : 1.0 V[p-p]
PB/PR : 0.7 V[p-p]
(75
Ω, 100 % color bar)
Analog composite input (option: AJ-YA93P):
BNC x 1
VIDEO: 1.0 V[p-p] (75
Ω)
Reference input (option: AJ-YA93P):
Analog composite, BNC x 2, loop-through, 75
Ω
ON/OFF automatically switched
SDI input (option: AJ-YA94G):
BNC x 1,
Compliant with SMPTE 259M-C/ITU-R BT. 656-4 standard
Video output signals
Analog component output (option: AJ-YA93P):
BNC x 3 (Y, PB, PR) (switchable with composite
outputs)
For AJ-SD93P
Y : 1.0 V[p-p]
PB/PR : 0.486/0.7 V[p-p] selectable
(75
Ω, 75 % color bar, 7.5 % setup level)
For AJ-SD93E
Y : 1.0 V[p-p]
PB/PR : 0.7 V[p-p]
(75
Ω, 100 % color bar)
Analog composite output (option: AJ-YA93P):
BNC x 2, VIDEO1, VIDEO2
SDI output (option: AJ-YA94G):
BNC x 1,
Compliant with SMPTE 259M-C/ITU-R BT. 656-4 standard
Monitor output:
BNC x 1
Video adjustment ranges
Video output gain:
±3 dB
Video output chroma gain:
±3 dB
Video output HUE (chroma phase):
±30 °
Video output setup level (black level):
±14 IRE (±100 mV)
Video output sync phase:
±15 µsec.
Video output SC phase:
±180 °
indicates safety information.
GENERAL