Post-update procedures – Pioneer AVIC X710BT User Manual

Page 3

Advertising
background image

"Boot Up Screen"

Step 5

Turn off your vehicle and turn on again, and wait for your system to boot up.

Confirming that the Firmware Update was Successfully Installed

Step 6

Please follow the steps below to confirm the update process was successful:

6-1. Confirm your System Firmware Version

• Press the "Menu" button

• Select the "Settings" tab

• Select

"System

Settings"

• Select

"Service

Information"

• Confirm that your system correctly displays the following information:

Version: 3.020100

Your navigation system is now ready for use.

Post-Update procedures

Step 7

7-1. Calibrate the Screen

Press the "Menu" button and touch the "Settings" tab. Select "System Settings", and touch
the "Screen Calibration" button.

Proceed with the guidance shown on the display and tap the screen to align the calibration.

Questions
If you have any questions, please contact the Pioneer Customer Service Center at 1-800-421-
1404. Pioneer service representatives are available Monday through Friday, 10:00 a.m. to
7:30 p.m. (Eastern Time).

Advertising
This manual is related to the following products: