Panasonic SC-AK300 - Manual (Page 18)

18
RQT6131
Compact disc operations
1
2
3
A
2
1
3
DISPLAY
DISPLAY
B
Listening to compact discs
Direct access play
Remote control only
1
Press [DISC].
2
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
3
Press the numeric button to select the
desired track number.
The CD will be played from the selected track to the last track
of the disc.
To select a two-digit track
Press [
≥ 10] and then the two numbers you want within 10 seconds or
so.
For example
Track no. 20: [
≥ 10] ➞ [2] ➞ [0]
Track no. 35: [
≥
10] ➞ [3] ➞ [5]
Note
You cannot use direct access play with 1-SONG, 1-RANDOM or
A-RANDOM mode.
Repeat play
Remote control only
A Press and hold [PLAY MODE] before or
during play.
“REPEAT ON” and “ ” are displayed.
To cancel repeat play
Press and hold [PLAY MODE] once again. “REPEAT OFF” is
displayed and “
” is cleared.
To repeat your favorite tracks
1. Program the tracks you want (perform steps 1 ~ 6 on page 16).
2. Press and hold [PLAY MODE] and make sure “REPEAT ON” and
“ ” are displayed.
3. Press [CD : / J ]. Playback will start.
To use repeat play with CD Play Mode function
Set the desired mode (
A page 17), press and hold [PLAY MODE]
before or during playback, and make sure “REPEAT ON” and “ ”
are displayed.
CD display
This function allows you to display the remaining play time of the
current track.
During play or pause mode
Press [DISPLAY].
Every time you press the button:
Elapsed play time
↔ Remaining play time
Note
When track number 25 or greater is playing, remaining play time
display shows “– –:– –”.
B