Panasonic SC-AK300 - Manual (Page 20)

20
RQT6131
Recording operations
Preparatory steps
Do these steps before each recording.
Wind up the leader tape so recording can begin immediately.
Press [ c DECK 2 OPEN] and insert the
cassette to be recorded on.
Insert with the exposed tape facing down.
1
1
3
2
OPEN
DECK 2
A
B
C
Tab for side B Tab for side A
To protect tapes against further recording
Side A
Before recording (Deck 2 only)
Types of tapes which can be recorded correctly
Use normal position tapes.
High position and metal position tapes can be used, but this unit will
not be able to record or erase them correctly.
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown.
How volume and sound quality affect recording
The tape you are recording is not affected whatsoever by changes in
volume and sound quality.
To erase a recorded sound
1. Press [TAPE : ] then [ L /–DEMO].
2. Insert the recorded tape into deck 2.
Ensure there is no tape in deck 1.
3. Press [ a REC].
Your attention is drawn to the fact that recording pre-recorded tapes
or discs or other published or broadcast material may infringe
copyright laws.
Notes
• You cannot open deck 1 while recording.
• You cannot fast-forward or rewind one deck while recording with
the other.
A
To re-record
Normal position tape
B
Adhesive tape
Front side
C