Panasonic SC-AK300 - Manual (Page 21)

21
RQT6131
Recording operations
Recording from radio broadcasts
A
B
REC
2
2
C
REC
PLAY MODE
Recording from compact discs
You can use 1-DISC/ALL-DISC/1-SONG mode ( A page 17) to make
recordings.
Preparations:
• Do the preparatory steps ( A page 20).
• Insert the disc(s) you want to record ( A page 15).
1-DISC/ALL-DISC recording
1
Do steps 1 to 4 on page 17.
Ensure CD is stopped.
2
Press [ a REC] to start recording.
The CD starts.
1-SONG recording
Do steps 1 to 5 on page 17.
Press [ a REC] to start recording.
The CD starts.
To stop recording
Press [
L /–DEMO].
Disc play stops automatically.
If the tape finishes before the disc
The disc continues playing. Press [
L /–DEMO] to stop it.
To record programmed tracks
1 Program the tracks ( A page 16).
2 Press [ a REC] to start recording.
Play starts.
To stop recording, press [ L /–DEMO].
Disc play stops automatically.
Preparation: Do the preparatory steps ( A page 20).
1
Tune to the required station.
( z page 12 or 13).
2
Press [ a REC] to start recording.
To stop recording
Press [
L /–DEMO].
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To cut an unnecessary part while recording
1. Press [
L /–DEMO] during the unnecessary part. The cassette deck
will go into the stop mode.
2. Press [ a REC] to resume recording again.
To record on the other side of the tape
Turn the tape over and press [
a REC].
Note
When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
To reduce noise while AM recording (Beat proof
function)
Remote control only
Press and hold [PLAY MODE] while recording.
Each time you press and hold the button, “BP1” and “BP2” will be
displayed alternately.
Select the position where there is less noise.
C
B
A