Panasonic SC-AK300 - Manual (Page 23)

23
RQT6131
Timer operations
Previous display
Using the timers
Using the play/record timer
The timer has two functions. It can be set to on at a certain time to
wake you up, or it can be set to record the radio or from the aux
source.
The play timer cannot be used in combination with the record timer.
Preparations:
• Turn the unit on and set the clock ( A page 11).
• For the play timer, prepare the music source you want to listen to;
tape, CD, radio or aux, and set the volume.
• For the record timer, check the cassette’s erasure prevention tabs
(
A page 20: A ), insert the tape in deck 2 ( A page 20: C ) and
tune to the radio station ( A page 12) or select the aux source ( A
page 25).
1
Press [CLOCK/TIMER] to select the
timer function.
Every time you press the button:
CLOCK REC PLAY
r PLAY : to set the play timer
r REC : to set the record timer
2
ON time setting
1
(Within 8 seconds or so)
Press [
g
/REW/
3
] or [
4
/FF/
f
]
to select the starting time.
2 Press [CLOCK/TIMER].
3
OFF time setting
1 Press [
g
/REW/
3
] or [
4
/FF/
f
]
to select the finishing time.
2 Press [CLOCK/TIMER].
The start and finish times are now set.
4
Press [ r PLAY/REC] to display the timer
indicator.
Every time you press the button:
REC PLAY
(OFF)
r PLAY : to turn the play timer on
r REC : to turn the record timer on
(The indicator doesn’t appear if the start and finish times or the
clock hasn’t been set.)
5
Press [ f ] to turn the unit off.
The unit must be off for the timers to operate.
• For play timer
The timer play will start at the preset time with volume
increasing gradually up to the volume level you pre-set.
•
For record timer
The record timer comes on about 30 seconds earlier than
the set time.
To cancel the timer
Press [
r PLAY/REC] to clear the timer indicators from the display.
(The timer comes on at the set time everyday if the timer is on.)
To change the settings (when unit is on)
• To change the play/record times
Do steps 1, 2, 3 and 5.
•
To change the source or volume
1. Press [
r PLAY/REC] to clear the timer indicator from the display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
(Continued on next page)
Remote control only
1
2
3
4
5
2 • 3
5 4
1 • 2 • 3
FOR PLAY TIMER FOR RECORD TIMER
FOR PLAY TIMER FOR RECORD TIMER
FOR PLAY TIMER FOR RECORD TIMER
FOR PLAY TIMER FOR RECORD TIMER
CL CLOCK/ CK/
TIMER TIMER
CL CLOCK/ CK/
TIMER TIMER
CL CLOCK/ CK/
TIMER TIMER