Panasonic SC-AK300 - Manual (Page 25)

25
Timer operations
RQT6131
Reference
REC
SLEEP
– AUTO OFF
AUX
A
B
C
Headphones
(not included)
Using the timers
Using the sleep timer
This timer turns your system OFF at the set time (Max. 2 hours, set at
30-minute intervals). It lets you fall asleep listening to music.
Preparations:
Switch on the power.
The figure shows how to set the system to standby mode after 30
minutes.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 90 SLEEP 120 SLEEP 60 SLEEP 30 SLEEP OFF
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time:
(only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
Notes
• The sleep timer turns OFF automatically the moment you attempt
to edit-record a CD.
• The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
Using an external unit
Listening to an external source
(See page 7 for external unit connection)
1. Press [AUX].
The system will come on automatically.
2. Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)
Recording from an external source
1. Press [AUX].
2. Press [ a REC] (recording starts).
3. Start playback from the external source. (For details, refer to the
owner’s manual of the equipment.)
Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm stereo
Note
Avoid listening for prolonged periods of time to prevent hearing damage.
Remote control only
B
A
C