Ice cubes making – Pelco 20145JF User Manual
Page 7
When you want to make ice cubes, take out complete set of ice tray carrier, pour water in ice
trays and slide it back.
After ice cubes have been formed in the ice trays, free the ice cubes from the ice trays by turning
the ice tray’s knob clockwise. Twist it again and allow ice cubes to drop into the ice cube
container underneath.
PRECAUTION: Make sure that the ice cube container is beneath the ice trays.
NOTE:
Ice tray design may differ in different models.
TEMPERATURE CONTROL
The temperature inside the refrigerator may vary according to the frequency of door opening,
food status or the amount of food stored in the refrigerator. Adjust the thermostat knob to change
the internal temperature according to the enviro
,
nmental temperature. For reference please see
the following table:
ICE CUBES MAKING
06
Position “0”
Off position
Position “2 ~ 3”
When environmental temperature is below 15 °
C
Winter season
Position “4”
When environmental temperature is 15 °
C - 30 °
C
Moderate season
Position “5 ~ 6”
When environmental temperature is 30 °
C - 40 °
C
Summer Season
Position “7 ~ 8”
When environmental temperature is above 40 °
C
In special cases, not
recommended normally
Ice Tray set
Ice Cube container
Ice Tray Knob
Thermostat Knob
4
5
3
6
2
7
1
8
0