First-time operation – Panasonic CF-18 Series User Manual

Page 12

Advertising
background image

12

Getting Started

First-time Operation

NOTE

If [Windows XP is currently configured to manage the Intel(R) PRO/Wireless
LAN adaptor.] is displayed, select [Yes].

8

Calibrate the touchscreen.

1

Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].

2

Touch the “+” mark on the calibration screen with the stylus (included) for about one second.

3

After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed.

Windows 2000

1

Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].

2

Touch the “+” mark on the calibration screen with the stylus (included) for about one second.

3

After the calibration procedure is executed (e.g., after the nine “+” marks are
touched), the procedure ends when Enter is pressed.

Windows XP

9

Enter your administrator password and select

.

9

Windows XP

Create a new account.

1

Select [Start] - [Control Panel] - [User Accounts] - [Create a new account].

2

Follow the instructions on the display to create a user account.

3

Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.

CAUTION

Remember this password! If the password is forgotten, Windows cannot be operated.
You can create a password reset disk beforehand (

page 14).

When creating a new user account:

If you make mail settings, create password reset disks (

page 14), or con-

duct other related operations before creating the user account, you will be un-
able to use any previous mail history or settings.
When you create the first new account, you can only select [Computer admin-
istrator].
Once a “Computer Administrator” account has been created, you can create
additional limited user accounts.
Note also that only the added user account will be displayed in the Welcome
screen. The account for the administrator created during Windows setup will
not be displayed.

NOTE

If “Yes, make this computer a member of the following domain” is selected,
the following message may be displayed: [An invalid domain was specified.
Would you like to proceed for now and try joining a domain later?]. In this
case, select [Yes]. After selecting [Yes], the computer will restart automati-
cally, but sometimes the [Starting Windows] message will remain on the screen,
and windows will not start up. If this happens, hold

Alt down while

pressing Tab until [Network Identification Wizard] is displayed on top, and
follow the instructions on the screen.

NOTE

Advertising