Names and functions of parts – Panasonic CF-18 Series User Manual

Page 36

Advertising
background image

36

Appendix

(

“PC Cards”)

PC Card Slots

(

“Modem”)

Modem

(

“LAN”)

LAN

(

“USB Devices”)

USB Ports

DC IN 16.0 V

DC-IN Jack

Use this port to a serial mouse or serial
communication devices.

A cable can be connected to prevent
theft of your computer. For more infor-
mation, read the manual provided with
the cable.

LOCK

(

“External Display”)

Use only a monaural condenser micro-
phone (miniature jack). Using an input
source other than a monaural condenser
microphone may not allow audio to be
input or may damage the equipment.

Microphone Jack

Use this jack to connect headphones or
amplifier-equipped speakers. Audio
output from the internal speaker is dis-
abled when headphones or external
speakers are connected.

Headphone Jack

Security Lock

Names and Functions of Parts

Serial Port

External Display Port

The strap has been designed to carry only the weight of the
computer. Therefore, be sure that the strap does not carry a weight
that exceeds the weight of the computer. The strap may acci-
dentally come loose from the computer.
Do not use a strap that is damaged or about to tear.

CAUTION

The hand strap can be attached to any two of the four corners using
screws (A) which were used to attach the hand strap.
Adjust the length of the belt so that the computer does not fall by mis-
take, and firmly hold the computer when using it.

(The above illustration shows the position
where the hand strap is attached at the factory.)

Hand Strap

Advertising