Primera Technology Fujitsu Tape Drive RX300 S2 - Manual

1
PRIMERGY RX300 S2 User’s Guide
1
2
3
4
5
6
7
9
8
Areas Covered
Before Reading This Manual
This section explains the notes for your safety and conventions used in this manual. Make sure to read this
section.
Chapter 1 Overview
This chapter explains component names and basic operations of this server, as well as an
overview of the software provided with this server. In addition, the workflow, from placing
the server to starting the operation, is also described.
Chapter 2 Checking before OS Installation
This chapter explains the preparation on the server and cautions necessary before OS
installation. Please read this chapter before starting installation.
Chapter 3 OS Installation Using ServerStart
This chapter explains how to install the OS on the server using ServerStart.
Chapter 4 Manual OS Installation
This chapter explains how to install the OS without using ServerStart.
Chapter 5 Operations after OS Installation
This chapter explains the operations to be performed after OS installation. Be sure to perform
those operations before operating the server.
Chapter 6 High Reliability Tools
For stable PRIMERGY server operations, we recommend that high reliability tools be
installed. This chapter explains the installation and necessary settings of high reliability tools.
Chapter 7 Installing Internal Options
This chapter explains how to install internal options on this server.
Chapter 8 Hardware Configuration/Utilities
This chapter explains how to make the environment settings necessary to operate the server.
Chapter 9 Operation and Maintenance
This chapter explains the operations necessary after starting to use this server as well as daily
care and maintenance.
Appendix
This appendix explains the specifications for the server and internal options. It also covers
how to recycle the products.