Pioneer Drive r11 User Manual
Pioneer Hardware
Advertising
Table of contents
Document Outline
- 1 Introduction
- 2 Interface
- 3 R11 Series DRIVE Descriptions
- 4 Packet Commands
- 4.1 BLANK Command
- 4.2 CLOSE TRACK/RZONE/SESSION/BORDER Command
- 4.3 FORMAT UNIT Command
- 4.3.1 Format Code = 001b
- 4.3.2 Format Code = 111b
- 4.4 GET CONFIGURATION Command
- 4.5 GET EVENT/STATUS NOTIFICATION Command
- 4.6 GET PERFORMANCE Command
- 4.7 INQUIRY Command
- 4.8 Log Select Command
- 4.9 Log Sense Command
- 4.10 MECHANISM STATUS Command
- 4.11 MODE SELECT (10) Command
- 4.12 MODE SENSE (10) Command
- 4.13 PLAY CD Command
- 4.14 READ (10), READ (12) Command
- 4.15 READ BUFFER Command
- 4.16 READ BUFFER CAPACITY Command
- 4.17 READ CAPACITY Command
- 4.18 READ DISC INFORMATION Command
- 4.19 READ DISC STRUCTURE Command
- 4.20 READ HEADER Command
- 4.21 READ TOC/PMA/ATIP Command
- 4.22 READ TRACK/RZONE INFORMATION Command
- 4.23 REQUEST SENSE Command
- 4.24 RESERVE TRACK/RZONE Command
- 4.25 SEND DIAGNOSTIC Command
- 4.26 SEND DISC STRUCTURE Command
- 4.27 SET CD SPEED Command
- 4.28 SET STREAMING Command
- 4.29 TEST UNIT READY Command
- 4.30 VERIFY (10) Command
- 4.31 WRITE (10), WRITE (12) Command
- 4.32 WRITE BUFFER Command
- 5 Error Code
- 6 Notes