Panasonic M2616 - Manual (Page 43)

37
Malicious Call Trace
Malicious Call Trace provides a way for you to trace nuisance calls within your
system.
While you are on a call:
≠
Press Trace .
If you do not have a trace button:
† or ø
1. Press Transfer or Conference .
2. Dia l the Trace FFC, or SPRE code
followed by ° ° ° °‹
‹ ‹ ‹
.
∫ 2637 3. Press the DN Key beside the flashing
LCD indicator to return to the call.
Centrex/Exchange Switchhook Flash
Centrex/Exchange Switchhook Flash allows you to signal the Central
Office/Exchange (CO) during an established call to use a Centrex service such as
call transfer or three-way calling. Since CO features are designed into the
MSL-100 PBX, this feature is not applicable to the MSL-100.
To use Centrex/Exchange Line
Switchhook Flash:
1. Press Trunk Switchhook Flash . You
hear special dial tone.
2. Dial the codes for your custom Centrex
feature.
Trunk Switchook Flash
During a call: Malicious Call Trace - Centrex Switchhook Flash