Panasonic M2616 - Manual (Page 52)

46
Selectable Conferee Display and Disconnect
You can view the list of active conferees by using the Conferee Selectable Display
key and disconnect any party that has been added to the conference call. This
feature is not available on the MSL-100.
To view active conferees:
∫ Conf Display
1. While on a conference call, press the
Conferee Selectable Display key. The
LCD indicator
º
turns on. With each
key press, the screen changes to show
a different active conferee.
Note: This action has no effect on
the displays of the other telephones
involved in the conference.
® 2. Press the Release key . If configured,
the Conference Count Display returns.
The LCD indicator
º
turns off.
To disconnect a conferee:
∫ Conf Display
1. While on a conference call, press the
Conferee Selectable Display key. The
LCD indicator
º
turns on. Continue to
press the key until the conferee that is
to be disconnected is displayed on the
screen.
∫ 2637 2. Press the DN Key on which the
conference call is established. The
selected conferee is disconnected from
the call.
∫ Conf Display
3. If there are additional conferees to be
disconnected, press the Conferee
Selectable Display key until the
conferee that is to be disconnected is
displayed on the screen.
® 4. Press the Release key . If configured,
the Conference Count Display returns
and is updated to reflect the revised
total count of conferees. The LCD
indicator
º
turns off.
To talk with more than one person: Conferee Display & Disconnect