Pioneer PDR-W839 - Manual (Page 12)

12
3 Controls and Displays
En
Remote control
1 DISPLAY/CHARA – Press to switch between display
modes (p.17), and between upper- and lower-case
characters while using CD text (p.24).
2 SCROLL – Press to scroll through long names in CD
text. (p.17, 24)
3 MENU/DELETE – Press to access the preference
menu options (p.16). Press to delete characters while
editing CD text (p.24–25).
4 FADER – Press to fade in or fade out during playback or
recording. (p.27,38)
5 PLAY MODE – Set the play mode to play one disc, all
discs in the 3-CD changer, or all discs in both the changer
and CD-R. (p.16)
6 10/0 MARK–Use in selecting tracks over ten, as well
as for choosing symbols when using CD text (p.24).
7 Playback control buttons
4 ¢ – Skip back/forward tracks. (p.15)
3 – Start or resume playback, or start recording from
record-pause mode.
1 ¡ – Press and hold for fast-reverse and fast-
forward playback, and to move cursor position when using
CD text. (p.24)
ENTER –Confirm menu settings (p.16); confirm
characters in CD text (p.25).
7 – Stop playback or recording.
8 REC THIS – Press to record the track that’s currently
playing in the changer. (p.14)
9 Disc select buttons
DISC 1/2/3 – Press to select and play disc 1, 2 or 3
from the changer. (p.15)
CD-R – Switch to the CD recorder and play the currently
loaded CD/CD-R/CD-RW(p.15)
10 Playback / skip buttons
PROGRAM – Program the playback track order.
(p.36,37)
CHECK – Check the tracks of a programmed playlist
(p.36), and monitor the CD changer (p.29).
CLEAR – Clear the last programmed track in program
play mode. (p.36)
RANDOM – Start random track/disc playback. (p.38)
REPEAT – Set the repeat mode. (p.37)
SKIP PLAY – Press to switch skip play on or off (p.32)
SKIP ID SET/CLEAR – Set or clear a track skip ID
for the current track. (p.34)
ENTER
DISC 1 DISC 2 DISC 3 CD-R
CURSOR
MENU/
DELETE
NAME MARK
SET CLEAR
DISPLAY
/CHARA
7 8
1 ¡
3
4 ¢
A B C D E F
G H I M N O J K L
P Q R S T U V W X Y Z
REC
THIS
PLAY
MODE
REPEAT
RANDOM
NAME CLIP TIME
FADER
SKIP PLAY
SKIP ID
PROGRAM
COMPACT DISC RECORDER/
MULTI-CD CHANGER
REMOTE CONTROL UNIT
CHECK CLEAR
1 2 3
4 5 6
7 8 9
10/0 >10
SCROLL
Î
1
2
3
4
5
6
8
9
10
7
11
12
13
14
15
11 NAME CLIP – Press to copy the current CD text to the
recorder’s memory.
12 Number / Letter buttons – Use to jump directly to
track numbers for playback, selecting track numbers for
editing / programming, and selecting letters when using
CD text.
13 NAME – Use to cycle through the CD text naming
options. (p.24)
14 >10– Use to select track numbers over 10.
15
8 – Pause playback or recording.